Auma Electric multi-turn actuators SA 07.1 - 48.1_SAR 0 Manuel d'utilisateur télécharger pdf (Page 14)

8. Opening the switch

compartment

To be able to carry out the following settings (sections 9. to 15.), the switch

compartment must be opened and, if installed, the indicator disc must be removed.

These settings are only valid for “clockwise closing”, i.e. driven shaft turns

clockwise to close the valve.

Work on the electrical system or equipment must only be carried

out by a skilled electrician themselves or by specially instructed

personnel under the control and supervision of such an electrician

and in accordance with the applicable electrical engineering rules.

8.1 Removing the switch

compartment cover

Loosen 4 bolts and take off the cover at the switch compartment

(figures H) .

8.2 Pulling off the indicator disc (option)

If installed, pull off indicator disc (figure J). Open end wrench

may be used as lever.

Multi-turn actuators SA 07.1 – SA 48.1 / SAR 07.1 – SAR 30.1

AUMA NORM Operation instructions

Fig. H-2: Cover without indicator glass

DSR

WDR

Figure J: Pulling off the indicator disc

Indicator disc

Fig. H-1: Cover with indicator glass

Bolts

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Auma Electric multi-turn actuators SA 07.1 - 48.1_SAR 0 Manuel d'utilisateur Page 14